How to Use Your Smok Pen
The Smok pen is an electronic pen for filling flavors of alcohol consumption such as beer and a shot of alcohol. You hold the pen between your index finger and thumb sufficient reason for a press of a button, a continuous blast of alcohol flows from the pen’s tip. It looks and works just like a regular pen, but is powered by the liquid you fill it with. To utilize the pen, simply place it in the middle of your thumb and index finger and turn on the self-cleaning cycle.
Most Smok pens have a coil built into the body that is covered in acne gel. When you connect the Smok Pen to your personal computer or USB port, it generates a magnetic field that causes the silicone gel to adhere to the coil. The Smok Pen then produces a stream of vapor that you inhale as you write. That is done via a USB connector that connects the pen to your personal computer or other connector. The energy supply for your pen is really a 0.3-ohm coil placed inside of the tank.
Like most rechargeable batteries, the Smok pen includes a charging port on underneath. The charging port could be reversed to be able to put the pen straight into your USB or laptop port if you want to use it when you are from the go. The Smok Kindle USB Rechargeable E-Book Battery includes a built-in charging port that can be reversed if desired. In order to get the maximum performance from your Smok Pen, you should make sure that you follow the manufacturer’s instructions carefully. These instructions offers you specific performance information on how to utilize your Smok Pen and in turn, maximize how much enjoyment you receive from using your product. The following instructions will highlight how to completely charge your Smok Pen between charges.
Charge your Smok Pen completely through the USB connection. If you don’t see any capacity in either the cigarette lighter adapter or the cigarette port on your Smok Pen, remove both devices from your computer. You should then re-insert the battery into the corresponding port on your own Smok Pen. This will give your device an even greater charge to give it the maximum performance levels. If you find that the charging port on your own pen does not charge fully, take it off and re-insert the battery. This will give you full charge for your pen 22.
Once your Smok Pen has reached the recommended charging level, remove the battery Puff Bar and place into your vaporizer or pipe for filling. Start your vaporizer or pipe. Your Smok Pen will start smoking after you have placed the coil in to the chamber. Turn the power switch on to full to get the best flavor from your pen. You ought not smoke while you are using your pen as the heating element could cause serious damage should you choose so.
While your Smok Mate is warming up, place the 1600mah battery in your pen. Ensure that you do not touch the power button as you achieve this may cause severe damage to your battery. Once your Smok Pen has already reached the right temperature, place the cotton in to the mouthpiece of the unit. You need to feel a difficult metal grip at the top of the Smok Mate that allows one to guide the coil through the whole heating process. Once you have completed this step, you’ll hear a beep and the screen will light up.
Your Smok Pen will now commence to heat up. The blue Smok smoke ring indicator should light up. At this point, it is possible to adjust the temperature control knob on your own pen. The temperature could be increased by turning the knob up. It can also be decreased by turning the knob down. The blue Smok Smoke Ring indicator should disappear once your pen reaches the proper temperature.
Once you have successfully added your coil and your battery, you will notice that the device will undoubtedly be cold for a while. That is normal. You should allow your battery and coil to warm-up before using your Vapes. In case you are wondering when the battery will be fully charged, you should test it before you leave your home. If your Vapes does not charge, you can use it for just two days without charging it.